EPA 608 Type 1 Practice Test

| Last Updated: July 16, 2021

I have created a free resource that will help you prepare for the EPA 608 Type 1 test. This free practice test will have a bunch of questions that you can expect to get on the actual test. I’d suggest taking this practice quiz as many times as it takes until you are comfortable with the material. This will help prepare you for the EPA 608 certification exam.

Other EPA Practice Tests

If you are interested in taking other EPA certification practice tests you can find them below:

Want More Practice?

Take your studying to the next level with our premium EPA 608 practice test solution! This is the ultimate test prep as you get access to hundreds of test questions that are not available anywhere else.

Track your progress & Identify areas of improvement

Covers Type I, II, III, and Core Questions

Hundreds of questions & growing!

Begin the Test

Results

Congratulations, you passed the EPA 608 type 1 practice test!

Want More Practice?

If you want to truly take your studying to the next level then I would suggest checking out our premium EPA 608 practice test solution. This is the ultimate test prep as you get access to hundreds of test questions that are not available anywhere else.
  • Hundreds of test questions (and more added all the time!)
  • Ability to track progress and find your weak spots
  • Covers all types (1, 2, 3 and core)
If you are interested you can check out the premium practice tests here. Looking to study other EPA 608 types? Find those practice tests below: You can also retake the core test here. Click here to retake it

Sorry, you did not pass the test.

Need help studying?

Check out our Ultimate EPA 608 Practice Test Kit Here

The study guide will prepare you for the real EPA 608 test and will provide all topics that you need to know to pass.

You can also retake this test again here.

#1. According to the EPA, an appliance qualifies as “small appliance” if it is manufactured, charged and hermetically sealed at the factory with less than ___ pounds of refrigerant.

#2. Recovery equipment manufactured before November 15, 1993 must be capable of recovering ______ of the refrigerant:

#3. Recovery equipment manufactured AFTER November 15, 1993 must be capable of recovering ______ of the refrigerant, if the compressor is operating:

#4. Recovery equipment manufactured AFTER November 15, 1993 must be capable of recovering ______ of the refrigerant, if the compressor is not operating

#5. Checking the ______ inside the recovery tank allows you to check for air or non-condensables can be done by checking which of the following inside the recovery tank:

#6. System dependent devices can be used to recover refrigerants from devices with less than ___ pounds of refrigerant.

#7. The units used in trailers should not be recovered using current recovery systems because

#8. Units manufactured before 1950 should not be recovered using current equipment because

#9. Why is it important to obtain an accurate pressure reading of refrigerant inside a recovery cylinder?

#10. Non-condensables in a refrigeration system results in

#11. Which of the following techniques are effective when trying to recover refrigerant into a non-pressurized container from a refrigerator with an inoperative compressor?

#12. After installing and opening a piercing access valve, it must be ensured that the system pressure is greater than _______ before beginning the recovery procedure.

#13. When recovering refrigerant from small appliances with inoperative compressors, the recovering unit must be connected to

#14. When using a system dependant recovery device with an operating compressor, _____

#15. After the recovery is complete, it is important to remove solderless piercing valves because

#16. Technicians that handle refrigerant during service, maintenance, or repair of small appliances must have:

Submit


My name is Bob Wells and I am a retired HVAC tech from Washington state. I am currently retired and no longer do much with HVAC, however, I feel like I have a lot of knowledge in the subject and I wanted to create a website where I could talk about what I've learned and help upcoming HVAC techs. Find more info about me and HVAC Training 101.